Acceptors in undoped gallium antimonide

Undoped GaSb materials were studied by temperature dependent Hall (TDH) measurements and photoluminescence (PL). The TDH data reveals four acceptor levels (having ionization energies of 7meV, 32meV, 89meV and 123meV) in the as-grown undoped GaSb samples. The 32meV and the 89meV levels were attributed to the GaSb defect and the VGa-related defect. The Ga Sb defect was found to be the important acceptor responsible for the p-type nature of the present undoped GaSb samples because of its abundance and its low ionization energy. This defect was thermally stable after the 500°C annealing. Similar to the non-irradiated samples, the 777meV and the 800meV PL signals were also observed in the electron irradiated undoped GaSb samples. The decrease of the two peaks' intensities with respect to the electron irradiation dosage reveals the introduction of a non-radiative defect during the electron irradiation process, which competes with the transition responsible for the 777meV and the 800meV PL peaks.published_or_final_versio

Identification and characterization of long-range SOX9 enhancers in limb development

The transcription factor Sox9 is a master regulator of skeletogenesis. Heterozygous mutations of human SOX9 result in Campomelic Dysplasia (CD), in which affected individuals display distinct abnormalities in limbs and other skeletal assemblies. Recently, chromosomal translocations and deletions at >1Mb from SOX9 have been detected in some CD patients, suggesting the requirement of long‐range regulatory elements in mediating both spatiotemporal and dosage of Sox9 during limb development. To this end, we exploited several published ChIP‐Seq data, and identified nine, evolutionarily conserved, putative limb enhancers of SOX9, namely E1Sox9 to E9Sox9. Transgenic mouse embryos carrying E1Sox9‐driven LacZ reporter showed discrete transgene expression at the pre‐scapular domain where endogenous Sox9 is also expressed. Bioinformatic analyses on our candidate enhancers result in the identification of several signaling effector binding motifs, and indeed, we revealed that BMP‐Smad and Shh‐Gli pathways are possible upstream regulatory networks that govern the spatiotemporal and dosage of limb Sox9 expression via our predicted enhancers, respectively. Our results unveil the underlying molecular control in governing the complex patterning of Sox9 expression in the developing limb, and provide new molecular insight to the etiology of CD syndrome.postprin

Pigmentation and dermal conservative effects of the astonishing algae Sargassum Polycystum and Padina tenuis on guinea pigs, Human Epidermal Melanocytes (HEM) and Chang cells

Background: The preference for a fairer skin-tone has become a common trend among both men and women around the world. In this study, seaweeds Sargassum polycystum and Padina tenuis were investigated for their in vitro and in vivo potentials in working as skin whitening agents.Seaweed has been used as a revolutionary skin repairing agent in both traditional and modern preparations. The high antioxidant content is one of the prime reasons for its potent action. It has been employed in  traditional Chinese and Japanese medicine. For centuries, most medicalpractitioners in the Asian cultures have known seaweed as an organic  source of vitamins, minerals, fatty acids like omega-3 and omega-6 andantioxidants. The present objective of the study was to evaluate the potent dermal protective effect of the two seaweeds Sargassum polycystum and Padina tenuis on human cell lines and guinea pigs.Material and Methods: Seaweeds were extracted with ethanol and further fractionated with hexane, ethyl acetate and water. The extracts were tested for mushroom tyrosinase inhibitory activity, cytotoxicity in human epidermal melanocyte (HEM), and Chang cells. Extracts with potent melanocytotoxicity were formulated into cosmetic cream and tested on guinea pigs in dermal irritation tests and de-pigmentation assessments.Results: Both Sargassum polycystum and Padina tenuis seaweeds showed significant inhibitory effect on mushroom tyrosinase in the concentration tested. SPEt showed most potent cytotoxicity on HEM (IC50 of 36µg/ml), followed by SPHF (65µg/ml), and PTHF (78.5µg/ml). SPHF and SPEt reduced melanin content in skin of guinea pigs when assessed histologically.Conclusion: SPEt, SPHF and PTHF were able to inhibit HEM proliferation in vitro, with SPHF being most potent and did not cause any dermal irritation in guinea pigs. The results obtained indicate that SPHF is a promising  pharmacological or cosmetic agent.Key words: Hyper-pigmentation, Melanogenesis, Padina tenuis,  Sargassum polycystum, Tyrosinase, Whitening effect

Nitrogen doped-ZnO/n-GaN heterojunctions

Nitrogen-doped ZnO nanorods were prepared by electrodeposition using two different Zn precursors (zinc nitrate and zinc acetate), while all other growth conditions (dopant precursor, concentration, growth temperature, and bias) were identical. We have shown that the precursor used affects the properties of the ZnO nanorods, and that the presence of rectifying properties in n-GaN/N:ZnO heterojunctions is strongly related to the use of nitrate precursor for ZnO growth. The difference in the properties of ZnO obtained from two precursors is attributed to the differences in native defect and impurity concentrations, which could affect the electronic properties of the samples. © 2011 American Institute of Physics.published_or_final_versio

Solution-based growth of ZnO nanorods for light-emitting devices: Hydrothermal vs. electrodeposition

ZnO nanorods have been grown by two inexpensive, solution-based, low-temperature methods: hydrothermal growth and electrodeposition. Heterojunction n-ZnO nanorods/p-GaN light-emitting diodes have been studied for different nanorod growth methods and different preparation of the seed layer. We demonstrate that both the nanorod properties and the device performance are strongly dependent on the growth method and seed layer. All the devices exhibit light emission under both forward and reverse bias, and the emission spectra can be tuned by ZnO nanorod deposition conditions. Electrodeposition of rods or a seed layer results in yellow emission, while conventional hydrothermal growth results in violet emission. © The Author(s) 2010. This article is published with open access at Springerlink.com.published_or_final_versionSpringer Open Choice, 01 Dec 201

Gallium vacancy in GaSb studied by positron lifetime spectroscopy and photoluminescence

Positron lifetime technique and photoluminescence (PL) were employed to study the vacancy type defects in p-type Zn-doped and undoped GaSh samples. In the positron lifetime study, Ga vacancy related defect was identified in these materials and it was found to anneal out at temperature of about 350°C. For the PL measurement on the as-grown undoped sample performed at 10 K, a transition peak having a photon energy of about 777 meV was observed. This transition peak was observed to disappear after a 400°C annealing. Our results is consistent with the general belief that the 777 meV transition is related to the V GaGa sb defect, which is the proposed residual acceptor of GaSb.published_or_final_versio

System for deployment of groups of unmanned micro aerial vehicles in GPS-denied environments using onboard visual relative localization

A complex system for control of swarms of micro aerial vehicles (MAV), in literature also called as unmanned aerial vehicles (UAV) or unmanned aerial systems (UAS), stabilized via an onboard visual relative localization is described in this paper. The main purpose of this work is to verify the possibility of self-stabilization of multi-MAV groups without an external global positioning system. This approach enables the deployment of MAV swarms outside laboratory conditions, and it may be considered an enabling technique for utilizing fleets of MAVs in real-world scenarios. The proposed visual-based stabilization approach has been designed for numerous different multi-UAV robotic applications (leader-follower UAV formation stabilization, UAV swarm stabilization and deployment in surveillance scenarios, cooperative UAV sensory measurement) in this paper. Deployment of the system in real-world scenarios truthfully verifies its operational constraints, given by limited onboard sensing suites and processing capabilities. The performance of the presented approach (MAV control, motion planning, MAV stabilization, and trajectory planning) in multi-MAV applications has been validated by experimental results in indoor as well as in challenging outdoor environments (e.g., in windy conditions and in a former pit mine)

The Achene Mucilage Hydrated in Desert Dew Assists Seed Cells in Maintaining DNA Integrity: Adaptive Strategy of Desert Plant Artemisia sphaerocephala

Despite proposed ecological importance of mucilage in seed dispersal, germination and seedling establishment, little is known about the role of mucilage in seed pre-germination processes. Here we investigated the role of mucilage in assisting achene cells to repair DNA damage during dew deposition in the desert. Artemisia sphaerocephala achenes were first treated γ-irradiation to induce DNA damage, and then they were repaired in situ in the desert dew. Dew deposition duration can be as long as 421 min in early mornings. Intact achenes absorbed more water than demucilaged achenes during dew deposition and also carried water for longer time following sunrise. After 4-d dew treatment, DNA damage of irradiated intact and demucilaged achenes was reduced to 24.38% and 46.84%, respectively. The irradiated intact achenes exhibited much higher DNA repair ratio than irradiated demucilaged achenes. Irradiated intact achenes showed an improved germination and decreased nonviable achenes after dew treatment, and significant differences in viability between the two types of achenes were detected after 1020 min of dew treatment. Achene mucilage presumably plays an ecologically important role in the life cycle of A. sphaerocephala by aiding DNA repair of achene cells in genomic-stressful habitats

The perceptions of social responsibility for community resilience to flooding: the impact of past experience, age, gender and ethnicity

Community resilience to flooding depends, to a large extent, on the participation of community members to take more responsibility for enhancing their own resilience. The perception of social responsibility (SR) which is argued to be one of the antecedents influencing individual’s willingness to undertake resilient behaviours can significantly contribute to community resilience through individual and collective actions. Understanding of factors influencing the perceptions of SR of individuals within community might help with developing strategies to increase the perceptions of SR. This research explores perceptions of SR in relation to flooding for householders and local businesses and establishes their relationships with experience of flooding and demographic factors of age, gender and ethnicity. The data were obtained via a questionnaire survey of three communities in Birmingham and one community in South East London, UK, three with experience of flooding and one without. A total of 414 responses were received and used in the multiple regression analysis. The analysis identified ‘experience of flooding’, ‘age’ and ‘South Asian’ ethnic group as significant variables, suggesting that older individuals from South Asian ethnic groups with previous experience of flooding are likely to be more socially responsible than others without these attributes

Emergence of 3D Printed Dosage Forms: Opportunities and Challenges

The recent introduction of the first FDA approved 3D-printed drug has fuelled interest in 3D printing technology, which is set to revolutionize healthcare. Since its initial use, this rapid prototyping (RP) technology has evolved to such as extent that it is currently being used in a wide range of applications including in tissue engineering, dentistry, construction, automotive and aerospace. However, in the pharmaceutical industry this technology is still in its infancy and its potential yet to be fully explored. This paper presents various 3D printing technologies such as stereolithographic, powder based, selective laser sintering, fused deposition modelling and semi-solid extrusion 3D printing. It also provides a comprehensive review of previous attempts at using 3D printing technologies on the manufacturing dosage forms with a particular focus on oral tablets. Their advantages particularly with adaptability in the pharmaceutical field have been highlighted, including design flexibility and control and manufacture which enables the preparation of dosage forms with complex designs and geometries, multiple actives and tailored release profiles. An insight into the technical challenges facing the different 3D printing technologies such as the formulation and processing parameters is provided. Light is also shed on the different regulatory challenges that need to be overcome for 3D printing to fulfil its real potential in the pharmaceutical industry